Netgear WiFi Extender Setup: The Complete Installation Guide

Netgear WiFi Setup

Netgear WiFi extenders have the ability to extend the range of current wireless network to those areas where a router can’t reach alone. Basically, WiFi repeaters or boosters transform dead zones into fun zones. And believe us, Netgear WiFi extender setup is not a difficult task at all. This process can be completed effortlessly by following valuable steps given here.

WiFi Extender Placement

  • Firstly, place the extender and the router in the same room.

  • Make sure to position both the devices away from baby monitors, electronic toys, cordless phones, Bluetooth speakers, metal appliances, automatic gadgets, and related devices.

  • Plug the range extender as well as the router into a wall outlet.

  • Here, you have to wait for some time until the power light on the extender becomes visible.

  • Connect your extender to the current WiFi network. For this, you have two options: use the browser setup guide or connect via WPS.

Connecting Using the Web Browser Setup Guide

  • Be sure that the LED lights on the extender have started blinking.

  • Now, open the wireless network manager on your computer.

  • Find the Netgear extender’s WiFi network and connect to it.

  • Enter the password in the given field to make the connection successful.

  • Once done, open a web browser and enter mywifiext in the address bar.

  • A login window will appear asking you for username and password.

  • Fill in the details carefully and click on the login button.

Note: In order to keep unauthorized access at bay, try changing the default login credentials immediately after the Netgear extender installation.

Connecting via WPS (WiFi Protected Setup)

  • First of all, press the WPS button and hold it for around a few minutes.

  • Employ the same procedure on your router, gateway or access point.

  • Let the WPS LED light start blinking.

  • Once it becomes solid green, it means the connection has been made successfully.

Check the LED Status of Extender

Here is a list of different LED lights on your Netgear WiFi range extender:

  • Status: When the extender is turned on, the power lights will become stable.

  • Power: It shows the exact status of your WiFi extender.

  • PC to Extender: This LED lights up when a computer is connected to the extender.

  • WPS: It signifies a safe and secure wireless connection.

  • Link Rate: This light indicates a wireless connection between the extender and router.

  • Red Link Rate LED means a poor connection.

  • Amber means a good connection.

  • Green means the best connection.

Access the Smart Setup Wizard

After checking the status of LED lights on your wireless range extender, access its smart setup wizard. For this, navigate to its default login page via a web browser as mentioned above. After filling in the login details, you will be on the home page of Netgear Genie Setup. It is called the smart setup wizard which provides you with the on-screen installation steps.

All you have to do is simply follow these instructions carefully and set up your Netgear WiFi range extender. However, if you still face any issue, do contact the experts at toll-free 1-866-504-8616. They will explain each and every step properly and make your extender up and running within minutes.

Related posts

Leave a Comment