Planning a Safe Splash Pad to Get Rigor in Your Dull Dry Playground

Safe Splash Pad

Splash Pad Benefits and Safety Tips

Splash Pads are a wonderful rescue and fun time from the scorching summers. You can’t be in exotic recreation parks and counties to overcome the summer heat for the entire summer vacation.

How about bringing Splash Pad Surfaces in your close vicinity?

But, the burning question is that how is it possible?

One can always look around dull and dry playgrounds or not much in use swimming pools. These are the best places which can be converted into Splash Pad Areas at nominal cost. One of the adorable factors is that it has very little or no standing water. This eliminates the need for lifeguards and several supervisory staff. Splash Pad or Spray Pool is a water play recreation area usually in public parks. These are the modern version of the sprinkler cool-down concept. It creates a safe social space for community building where people of age groups can be at fun and leisure. Here are some of the key considerations which will help in planning a Safe Splash Pad area.

Safety Foremost

Safety should be such that one steps into this place without thinking of any potential hazards. Many safety organisations and Splash Pad Manufacturers have recommendations on the surface material like EPDM rubber and polyurethane and click-together tiles. Also the water feature like velocity should be within the specified limits. Though these areas are low water area yet drainage design should be such that kids cannot plug them to create pooling water area. Similarly, there should be no pointed or sharp edges which may become potential finger entrapments.

Target Audience

It is important to consider demographics while constructing a splash pad area. The visitors to the park will be multi-generational and the Splash Pad Manufacturers are focusing more on products for toddlers-to-teens age group. Hence there can be separate zones for high volume and low volume water players which cater to the older and youngest users respectively.

Checking for Permits and Zoning Before Proceeding

While considering the splash pad project, it is critical to check for permits and zoning before proceeding. These splash pads may be installed on either public or private land. Some of the appropriate places aretraditional parks, private residential associations, recreational or amusement parks etc.  These places have unique zoning requirements which require permissions and approvals from Government authorities.

Choice of Splash Pad Surface

Since these places are exposed to ongoing water, the surfaces tend to be slippery. One of the safety guidelines as per authorities is to have a coefficient of friction similar to broom-finished concrete. Resilient synthetic surfacing is a modern alternative which is suitable for the exposure to sun, overcoming bacteria and chlorinated water. Depending on the budget, one may choose between concrete broom finish and resilient surfacing.

Type of System installed and its splash pad mechanics

 The splash mechanics is another fundamental design consideration. This depends on the features of the splash pad which are active at any given point of time. There are two types of splash pad mechanics involved: a. the flow-through system and b. the recirculating (chlorinated) system. Recirculating systems are relatively costlier and require more space for installing equipment. They require maintenance similar to that of a swimming pool with respect to staff, chemicals, pump etc. Flow-through systems are easy to maintain and require less staff but need proper monitoring for health and safety fulfillment.

Preventing waterborne diseases

When there is water involved, after anti-skid, another concern is to protect people from waterborne bacteria like E. coli and giardia. Vulnerable infrastructure can give rise to potential concerns of sanitation and waterborne diseases. Despite no standing water, the spray water is prone to carry any contaminants which may be recycled and sprayed. Find out about the system and how it can be equipped to disinfect and filter water used in sprays.

Adding more fun by sequencing

The spray pads are not activated non-stop during the operating hours. There is a controller who manages the opening and closing of the water source. They also control the sequencing of water and use of various features. As the child touches a switch, the activator signals the controller to activate a regulated set of play features. These features can be sequenced at different times and different rates to keep the kids fascinated and engaged at all times.

The purpose of having a splash pad is to have fun-filled social time for the entire family. This can be ensured by paying attention to every phase of the construction right from planning, design, selection of Splash Pad Manufacturers and equipment, their installation, use and maintenance. Have fun and play this summer with safe Splash Pad Surfaces in your area!

Related posts

Leave a Comment